BillCheck

Home / Resources / How is the fuel surcharge calculated, and how do you check it on a freight bill?

How is the fuel surcharge calculated, and how do you check it on a freight bill?

Published on October 29, 2026, updated on November 12, 2026 · The BillCheck team · 6 min read

A fuel surcharge is a percentage or a per-mile amount added to the linehaul, tied to a public diesel price. In the US, almost every contract pegs it to the DOE weekly diesel index published by the EIA. To check it, you need three things from your contract: the index week the carrier must use, the base price (the peg), and the step. Then you recompute the line. On the invoices we audit, the fuel line is the single most frequent source of small, repeated overcharges.

A semi truck pulling a reefer trailer on a US highway, the kind of linehaul the fuel surcharge applies to
Photo Preston A Larimer, Unsplash

What is a fuel surcharge on a freight bill?

A fuel surcharge (FSC) is a separate line on the invoice that adjusts the freight price for the cost of diesel. It moves every week with a public index, so the carrier's base rate can stay fixed for the year. It applies to LTL, truckload and parcel, each with its own method.

The logic is simple. The carrier quoted you a base rate when diesel was at a given price. When diesel goes up, the surcharge goes up; when it goes down, the surcharge is supposed to go down too. The base rate never changes, the surcharge absorbs the fuel swings.

In practice, the line shows up as "Fuel surcharge", "FSC" or "Fuel" with either a percentage of the linehaul (common in LTL) or an amount per mile (common in truckload). Parcel carriers publish their own weekly percentage tables, which is a different subject, covered in our guide to the UPS fuel surcharge and its FedEx counterpart.

What matters for an audit: the surcharge is not a fixed fee. It is a calculation, and a calculation can be checked.

Which index do carriers use?

Almost all US truckload and LTL contracts reference the DOE weekly diesel price, published every Monday by the U.S. Energy Information Administration (EIA) as the U.S. On-Highway Diesel Fuel Price, national average, taxes included. Some contracts use a regional PADD price instead of the national average. Your contract names the one that applies.

The series is public and free. Over the last 14 months it has moved a lot: a national average of $3.52 per gallon in January 2026, $5.50 in April, $6.29 in September. A surcharge pegged to that index has therefore roughly doubled over the period, which is exactly why you cannot audit it with last year's rate in your head.

Two details trip people up. First, the week: most contracts apply the price published on the Monday of the week of shipment, some apply the previous week, a few apply a monthly average. Second, the geography: a carrier billing the Gulf Coast price on a Northeast lane is applying the wrong number, and the gap can be 20 to 40 cents per gallon in some weeks.

U.S. on-highway diesel, national average, monthly mean of the weekly DOE price
3.75 $/gal
Sep 25
3.82 $/gal
Nov 25
3.52 $/gal
Jan 26
4.92 $/gal
Mar 26
5.6 $/gal
May 26
4.96 $/gal
Jul 26
6.29 $/gal
Sep 26
6.22 $/gal
Oct 26

Source : U.S. Energy Information Administration, Weekly Retail On-Highway Diesel Prices, weekly values averaged by month, retrieved October 25, 2026

How is the fuel surcharge calculated in truckload?

A truckload fuel surcharge is usually a per-mile amount: for every step the DOE index rises above a base price (the peg), the carrier adds a fixed amount per mile. The contract sets the peg, the step size and the per-mile increment. Multiply the increment by the billable miles and you have the line.

Take a contract that reads: peg $1.20 per gallon, one cent per mile for every 6 cents above the peg. In a week where the DOE national average is $6.279, the index sits $5.079 above the peg. Divided by $0.06, that is 84.65 steps, rounded down to 84 steps in most contracts, so 84 cents per mile. On a 620-mile lane, the surcharge is 620 × $0.84 = $520.80.

Now the audit questions. Did the carrier use the right week? Did it round up where the contract rounds down? Did it apply the increment to practical miles when the contract says shortest miles? Each of these moves the line by a few dollars per load. On 300 loads a month, that is real money.

The figures above are an example to show the mechanism. Pegs, steps and increments are negotiated: your contract is the only reference that counts.

  1. 1

    Find the index week

    Shipment date, then the DOE price your contract designates for that week.

  2. 2

    Subtract the peg

    DOE price minus the base price written in the contract.

  3. 3

    Count the steps

    Divide by the step size and round the way the contract says.

  4. 4

    Apply to the miles

    Steps × increment × billable miles, on the mileage basis of the contract.

How is it calculated in LTL?

LTL carriers express the fuel surcharge as a percentage of the linehaul, read from a table that maps DOE price bands to percentages. The table is the carrier's, but your contract can cap it, freeze it or replace it with a negotiated one. The check is the same: right week, right band, right base amount.

The base matters as much as the percentage. Some contracts apply the fuel percentage to the net linehaul after discount, others to the gross rate before discount, and a few apply it to accessorials as well. A 28 % surcharge on a $1,000 gross rate with a 70 % discount is $280 or $84 depending on the base. That difference is the most common LTL fuel overcharge we see. The linehaul itself depends on the billed weight. If the carrier billed dimensional weight or reclassed the pallet after a remeasure, the fuel line carries the same error, so correct the weight first.

Also check that the percentage is read from the band that contains the DOE price of the shipment week, not the week the invoice was issued. Carriers that invoice monthly sometimes apply the current week's band to the whole month.

What to compare, line by line, on an LTL fuel surcharge

ItemWhere it comes fromWhat goes wrong
Index weekShipment date and the week rule of the contractInvoice week applied instead of shipment week
PercentageThe table or cap in your contractCarrier's public table used despite a negotiated cap
Base amountNet or gross linehaul as written in the contractApplied to gross, or to accessorials too
RoundingContract ruleRounded up at every step

How do you check the fuel surcharge on an invoice?

Recompute it. For each shipment: pull the shipment date, look up the DOE price for the index week, apply the peg and step or the band of your contract, and compare with the billed line. Flag every gap, then add them up by carrier and by month. A cent per mile looks like nothing until you multiply it by a year of freight.

Doing this by hand works for a dozen invoices. It does not work for a monthly LTL invoice with 300 shipments, each with its own week and its own base. That is what BillCheck does on every line of a truckload freight bill audit and an LTL freight bill audit: the index, the contract rule and the billed amount, shipment by shipment, with a credit request ready when the numbers do not match. Fuel is only one of the seven checks of a full freight audit: rate, fuel, accessorials, weight, duplicates, mileage and billing party.

On most freight bill audits, the errors add up to 1 to 3 % of the billed amount, sometimes 4. Fuel is rarely the biggest single error. It is the most frequent one.

Frequently asked questions

Who pays the fuel surcharge?

The party that pays the freight. If you are the shipper on a prepaid shipment, the fuel surcharge is on your invoice. The carrier collects it, but the amount is set by your contract and the public index, not by the carrier's own fuel cost.

What is the DOE fuel index?

It is the U.S. On-Highway Diesel Fuel Price published every Monday by the EIA, the statistics arm of the Department of Energy. It is a national average, taxes included, with regional breakdowns. Most US freight contracts peg their fuel surcharge to it.

What is a normal fuel surcharge for trucking?

There is no single normal rate: it depends on the peg, the step and the current diesel price. With diesel above $6 per gallon in September 2026, surcharges pegged near $1.20 run above 80 cents per mile under a classic one-cent-per-six-cents scale. The only number that counts is the one your contract produces.

Can a carrier apply the fuel surcharge to accessorials?

Only if the contract says so. By default, fuel applies to the linehaul. A surcharge applied to liftgate, detention or residential fees is a line to dispute.

How often does the fuel surcharge change?

Weekly for most truckload and LTL contracts, since the DOE index is published every Monday. Parcel carriers also update weekly. Some contracts use a monthly average, which smooths the swings but makes the shipment-week check even more important.

Sources

Read next

Get your freight bills audited

  1. 1Send us three invoices and your rate sheet
  2. 2We show you the overcharges live, during the demo
Book a demo

You leave with the discrepancy report, whether you work with us afterwards or not.